Activity in Technology and Support
Disable PPTP and L2TP server
Hello!I tested PPTP and L2TP VPN solutions, but considered another solution without the Cisco router involved.I've disabled all the virtual-access and vpdn stuff,sh run all | i vpdnreturns nothing, but the ports for PPTP and L2TP are still open and c...
CiscoISE policy applying on switch problem
Hello,I have a problem with applying policies from CiscoISE 3.2 on switch C3750. It simply doesn't stop the unauthenticated users from logging in to switch, nor it prevent commands that are forbidden by the created policy. In Live Logs I can see that...
Help with extended access list
So I've been working on my project and I've implemented vlans nad also router stick.Now I want to block connections between vlans that are not same with extended access list but something does not work..Here are the commands that I've writtenip acces...
Cisco Webex calling LGW - outbound calls failing, %VOICE_IEC-3-GW: SIP
Hi , Good day. I need some help to verify if there is any configuration issue from my end. Basically i have a registered LGW to the webex calling . The incoming call is working fine , but the outgoing call is getting the following error Outgoing ca...
Trustsec Network Authorization not Working
Hi All,I am newly building trustsec in my environment,trying to add one of the switch under trustsec. Have configured Trustsec settings and COA on the ISE for the switch and added the appropriate aaa commands , radius servers and cts commands.But sti...
Resolved! Redistribute NAT DIA into BGP or OSPF issue
Hi Guys, Can somebody help to identify what might be the problem here? I'm trying to redistribute NAT DIA into BGP but it's not working. Please see screenshot below. It only worked as expected after I put network 0.0.0.0 statement on bgp.
Cisco ACI - ELAM capture
Hi All,I am geting below alert while configuring ELAM on ACI leaf switch.Can any one suggest on this.module-1# debug platform internal tah elam asic 0Invalid CLI for platform type - TAHalso can some one share the procedure to perform the ELAM capture...
BGP using Layer 3 Switches
Hi All,I have 2 networks connected via OSPF. I need to route the connected networks to a third network via BGP.I noticed that BGP peering is established but no entry is visible on the routing table.Below is an extract of BGP config:router bgp 65200.1...
Downgrade Cisco 3650PD IOS 16.12.07 auf 16.09.06
Hello,I have a question, so far I have only ever upgraded to the next or higher version. Now the planis to downgrade because there are connection interruptions. FYI, it is a stack of 2 3650-48PDswitches. Almost nothing is configured there except that...
Call Handler Migration to RingCentral
Hello, I am in the process of migrating our voice suite from cisco to a 3rd party phone provider and am looking for tools to help identify call handlers in use and export them efficiently. Currently we have a Unity configuration that is outdated and ...
Cannot edit/duplicate templates in Prime with Chrome or Firefox
I cannot edit or duplicate template is Prime Infrastructure anymore.It started many month ago with Chrome.My Workaround was to use Firefox.But with the Update to Firefox 125 the same Issue is now happening here.I guess Chrome and Firefox disabled som...
About Errors When Connecting to [anyconnect VPN]
The following message is displayed when the connection button is pressed. Please tell me how to solve it. Certificate Validation Failure AnyConnect VPI version 5.0.04232 Secure Client UI version 5.0.00889 Certificate Expiration Date 2025/4/3
Changing BGP router-id
hi,i'll be changing an ISP/BGP peer. my question is, do i negate first the old bgp router-id or just directly configure/apply the new router-id?do i need to do a "clear ip bgp" to establish the new ISP/BGP peer?router bgp 65123 neighbor 63.21.16.4 sh...
Resolved! AP 3802 radios not up 9300 series poe+ switch
hello there, AP registers with WLC but unable to turn on the radios, so, ssid is not showing. but works well with POE injector. given the command "power inline static max 30000" in switch(9300 PA) as well but not working. cdp and lldp are disabled ...
ACI multipod with vPC HA FW
Hi All, I need your assistance to check if the following configuration going to work and are there any drawbacks/caveats?So far I identified OSPF convergence time and impact on a relatively large area 0 *(legacy design). Solution details:I have ACI M...
| User | Helpful Count |
|---|---|
| 101 | |
| 100 | |
| 80 | |
| 76 | |
| 57 |
